See How The Ironforge Works
The future of recovery & wellness is powerful, personal, and always within reach.
This is in independent review by Alex Fergus. Only thing to note is that the Ironforge now features a wider range of wavelengths but the total power is the same.
THE CHROMA DIFFERENCE
82%
Of members noticed a reduction in chronic pain or inflammation after using thier Ironforge.
74%
Of members noticed more consistent energy after using their Ironforge.
90%
Of members have recommended the Ironforge to a friend or family member.
*Based on a survey including n=50 current Chroma customers evaluating self-percieved efficacy.
Engineered with wavelengths that support:
The Chroma Ironforge has already changed the game for hundreds of high-performers & longevity seekers.
*Customer testimonials are not intended to be taken as medical advice.
Precision Engineering
The Chroma Ironforge is a compact, high-output red and near-infrared light device designed to deliver maximum biological impact quickly. Its low-profile build and thermal efficiency allow for powerful performance without bulk or excessive heat. Every component is selected based on first principles for consistent irradiance, precise wavelengths, durability, and intuitive operation โ making it effortless to integrate into your daily routine.
// Light Profile
850nm Near Infrared
810nm Near Infrared
760nm Near Infrared
670nm Deep Red
630nm Red
810nm Near Infrared
760nm Near Infrared
670nm Deep Red
630nm Red
50%
12.5%
12.5%
12.5%
12.5%
12.5%
12.5%
12.5%
12.5%
// Component Lifespans
LEDS
ALUMINUM HEAT SINK
FANS
MILITARY SPEC WIRING
POWER SUPPLY
ALUMINUM HEAT SINK
FANS
MILITARY SPEC WIRING
POWER SUPPLY
80,000 hrs
โ years
10+ years
10+ years
10+ years
โ years
10+ years
10+ years
10+ years
The Ironforge Spectrum
The Ironforge delivers a powerful blend of deep red and near-infrared light in the bodyโs most responsive wavelengths. It supports energy production, tissue repair, and inflammation control where it matters most - inside the cell. This isnโt just warmth. Itโs targeted, biological activation.
Outshining the Competition
We took the power of an entire full five-foot panel and engineered it into the worldโs most powerful hand-held light therapy device.
Ironforge
Red Light Panels
Average irradiance above 500mW/cmยฒ
๐ข
๐ด
๐ด
Power output to device cost ratio: Under $10 per mW/cmยฒ
๐ข
๐ด
๐ด
Compact design for targeted delivery
๐ข
๐ด
๐ข
75% Near-infrared for deep tissue penetration
๐ข
๐ด
๐ด
Therapeutic sessions in 30โ90 seconds
๐ข
๐ด
๐ด
Broad wavelength spread for wider benefit range
๐ข
Sometimes
๐ด
Truly portable form factor
๐ข
๐ด
๐ข
Absolutely flicker free
๐ข
Sometimes
Sometimes
Backed by a 5-year warranty
๐ข
Rarely
๐ด
Not All Light Is Created Equalโจ
While most brands focus on bulky panels and flashy features like voice recognition, we designed the Ironforge to lead the entire industry by delivering the highest irradiance at the lowest cost./
Device
Cost (USD)
Cost per mW/cmยฒ (USD)
Chroma Ironforge
$950
$6.42
Joovv Mini
$1099
$20.74
PlatinumLED Biomax 900
$1299
$14.39
Hooga Pro1500
$1199
$13.94
MitoPRO+ 1500
$1199
$15.67
Block Blue Light MEGA
$1510
$17.30
*This data is from an independent third party Alex Fergus and can be verified on the Light Therapy Insiders website.
Frequently Asked Questions
How do I use my Ironforge?
The Ironforge can be used with the faceplate directly against your skin, or up to 6" for targeted use. Keep the device in constant motion over your body to avoid excessive heat buildup.
As with any new stimuli, start small and work up to a dose that works well for your body. Many people find their ideal dose between 5-15 minutes a day, spread over the whole body and focusing more on their problem areas.
How long will it take to see results?
The timeline for seeing results from red light therapy (RLT) can vary depending on the individual's condition, the specific treatment goals, and the device used. Some of our users report feeling near-immediate relief, specially in terms of reduced inflammation and pain, while others see relief after a few sessions.
Generally, for skin-related outcomes such as improved texture and healing, or for deeper tissue effects like muscle recovery and joint health, noticeable results may emerge after consistent use over a period of two to six weeks. The key to effective RLT is regular and correct usage, following the guidelines specific to your device. With our devices designed for efficiency and potency, users might experience quicker onset of benefits.
Is red light therapy proven to work?
Thousands of peer-reviewed studies support the use of red and near-infrared light for promoting recovery, reducing discomfort, and supporting tissue repair. Ironforge uses the most researched wavelengths and delivers them at intensity levels consistent with whatโs been shown to be most effective.
Can I use it on my face, joints, or sensitive areas?
Absolutely. Ironforge was designed for targeted relief and recovery. You can use it on your knees, back, neck, shoulders, or face. Just be mindful of distance and duration.
Will this replace my physical therapy, massage, or clinic visits?
Ironforge is not a medical treatment and shouldnโt replace professional care when needed. However, many users find they can reduce their reliance on recurring appointments or intense "healing" modalites such as ice baths by integrating Ironforge into their daily recovery routine.
Is Ironforge safe for daily use?
Yes. Ironforge uses wavelengths that have been widely studied and shown to be safe when used properly. There is no UV or harmful radiation, and the device is engineered to meet strict safety standards. Just follow the usage guidelines and allow your body to adapt gradually if you're new to red light therapy.
Is Ironforge portable? Can I travel with it?
Yes. Every Ironforge come with a travel case roughly the size of a small briefcase. Simply throw it your car and enjoy powerful red light therapy where ever life takes you. Whether youโre on the road for competition or working remotely, your recovery routine doesnโt need to pause.
Do I need to use it on bare skin?
Yes. For optimal results, red and near-infrared light should reach the skin without interference. Using Ironforge directly on clean, bare skin maximizes absorption and effectiveness. For those more private areas of the body enjoy the comfortable of using this in your own home.
How long will it take to get my order?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
Isn't more than a few J/cm^2 too much power?
No! Let's estimate the fluence of red and NIR light one might get from the sun on an average summer day under the shade of a tree...
1. Sunlight Spectrum Intensity:
Sunlight is approximately 1000 W/m^2 in direct sunlight. When considering the red to NIR range (600-900nm), about 43% of the solar spectrum falls into this range. So, the intensity in this range is approximately: 0.43 x 1000 W/m^2 = 430 W/m^2
2. Shade Reduction:
Being in the shade can reduce sunlight intensity by around 50-90%, depending on the shade's type and density. Let's take an average value of 70% reduction. Intensity in the shade = 0.3 x 430 W/m^2 = 129 W/m^2
3. Conversion to Fluence (Total Dose):
Fluence (J/cm^2) is power (W/cm^2) multiplied by time (seconds). Let's consider
exposure over a day (let's say 6 hours of variable sunlight in shade). This would be 6 x 60 x 60 seconds = 21,600 seconds.
First, convert the intensity from W/m^2 to W/cm^2:
129 W/m^2 = 0.0129 W/cm^2
Then, compute the fluence:
Fluence = 0.0129 W/cm^2 x 21,600 s = 278.88 J/cm^2
So, in the shade on an average summer day, one could be exposed to a total
fluence of near 300 J/cm^2 in the red & near infrared range from the sun.
We find the total exposure seems to be more important in
many processes, so we us multi-watt red/nir light in our device to offer quick effective treatments.
High Fluence Supporting Research:
Can I use my Ironforge worldwide?
Yes! Your Ironforge is compatible with both 110/120 and 220/240 V, (adapter not included).
Some LEDs are not lit up, is my device broken?
Rest assured the device is working properly.
Wavelengths beyond about 700 nanometers are invisible to the human eye, it's normal to not see any light from the LEDs in this range.
This is by design as near infrared (NIR) light is
the frequency range that penetrates deepest into the tissue to do their job.
One way to verify complete function is using an inexpensive wall power meter like the "kill-a-watt" device, you should see around 210W of power draw.
Will this help raise my Vitamin D levels?
No, but you'll be interested in our D-Light device, the first ever consumer UVB LED device for Vitamin D production.
Is there support if I have questions?
Yes. Our team is always here for you. Whether it's setup help, usage tips, or deeper questions about red light therapy, weโre ready to support your recovery goals.
Simply contact us at hello@getchroma.co and we will respond within 24 hours.
Discover the Full Spectrum
ESSENTIALS
Zero-flicker, circadian-aligned white for all day focus & deep amber for deep sleep.
4.9/5 - 26 Reviews
WEARABLES
Filter out 98.5% of sleep-disrupting blue & green light emitted from screens.
5/5 - 31 Reviews
